Visit One of Our Three Locations Today!

Tru-flate Rubber Tipped Standard Blowgun 1/4"

Tru Flate

Oil resistant soft replaceable rubber tip. Will not mar delicate surfaces. Gives a leak-proof seal against oil passages fuel lines etc. when air pressure is needed for cleaning. 1/4" female NPT inlet allows full line pressure to be used. Carded. 5/master. IMPORTANT: To comply with OSHA regulations Standard Blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.

We Also Recommend

ProSource Tie-Down, 1 in W, 16 ft L, Polyester, Yellow, 1000 lb, J-Hook End Fitting
Prosource

ProSource Tie-Down, 1 in W, 16 ft L, Polyester, Yellow, 1000 lb, J-Hook End Fitting
Curt Reducer Sleeve Set (3" to 2-1/2" to 2" Shanks, 2 Pieces)
CURT

Curt Reducer Sleeve Set (3" to 2-1/2" to 2" Shanks, 2 Pieces)
ProSource Tie-Down, 1 in W, 15 ft L, Polyester Webbing, Metal Ratchet, Red, 500 lb
Prosource

ProSource Tie-Down, 1 in W, 15 ft L, Polyester Webbing, Metal Ratchet, Red, 500 lb
ProSource Tarpaulin, 30 ft L, 20 ft W, 3.5 mil Thick, Polyethylene, Blue
Prosource

ProSource Tarpaulin, 30 ft L, 20 ft W, 3.5 mil Thick, Polyethylene, Blue
GearWrench Slotted Dual Material Screwdriver
GearWrench

GearWrench Slotted Dual Material Screwdriver